UBM CNC Horizontal Boring & Milling Mahcine Inquiry
> UBM High Loading
-
Features:
- An optimal cost to performance series. Their machining capacity approaches to a floor type boring machine and even more than a small type boring machine.
- Choice of Ø1300mm and Ø150mm of spindle diameter.
- Max. table load is 30 tons (40 tons optional).
- Applicable for machining for large molds, large box shaped workpieces, power generation equipment and vessel manufacturing equipment.
- Available to use a face milling plate for internal taper surface or curred surface machining.
- With the use of an optional swiveling head (-5º ~ 45º) (pateuted in Taiwan M506663 and in China CN204868135U), the machine is able to machine taper hole and slant surface. In particular, it provides an economical and efficient solution for machining of hub be poind power generator.
-
MODEL UNIT UBM-13032RL UBM-13042RL UBM-13052RL UBM-13062RL UBM-15032RL UBM-15042RL UBM-15052RL UBM-15062RL TABLE Table Size mm 2200x2500 x0.001°(2500X3000X0.001°) 2200x2500 x0.001°(2500x3000 x0.001)° T-Slots mm 28x11(28x13) 28x11(28x13) Maximum Load kg 30000(40000) 30000(40000) TRAVEL X Axis mm 3200 4200 5200 6200 3200 4200 5200 6200 Y Axis mm 2500(3000,3500) 2500(3000,3500) Z Axis mm 2000(2500) 2000(2500) W Axis mm 900 900 SPINDLE Diameter mm Ø 130 Ø 150 Speed rpm 10~2000(2500)(3000) 10~1500(2000) Taper 7/24 taper, ISO.50, BT-50 7/24 taper, ISO.50, BT-50 DISTANCES Spindle Center to Table mm 0~2500(0~3000)(0~3500) 0~2500(0~3000)(0~3500) Spindle Nose to Table Center mm -50~2850(3350){50~2950(3450)} -50~2850(3350){50~2950(3450)} Height from ground to table surface mm 1520 1520 FEED RATE Rapid Feed rate X/Y/Z m/min 8/10/10(6/10/10) 8/10/10(6/10/10) Rapid Feed rate W m/min 6 6 Minimum Setting mm/min 0.001 0.001 Cutting Feed Rate mm/min 1~5000 1-5000 MOTOR Spindle Servo Motor-cont./ 30min kW 22/26(30/37) 22/26(30/37) Axis X / Y / Z / W / B kW 9/7/9/4/9 9/7/9/4/9 Lubricator Motor kW 0.15 0.15 Hydraulic Pump kW 2.25 2.25 Coolant Pump kW 1.17 1.17 Chip Conveyor kW 0.2 0.2 Oil Cooling Pump kW 0.75 0.75 ATC No. of Tools pieces 40(60) 40(60) Tool Selection Absolute Absolute Tool Change Time Sec. 15 15 Max. Tool-Diameter/Length mm Ø 125/ Ø 250(Without Adjacent Tool)/ Length 400 Ø 125/ Ø 250(Without Adjacent Tool)/ Length 400 Max. Tool Weight kg 25 25 COOLANT &LUBRICATION Coolant Tank Volume L 400 400 Hydraulic Tank Volume L 80 80 Lubrication Tank Volume L 8 8 MISCELLANEOUS Power Required kVA 65 65 Pressurized Air kg/cm² 6 6 -
standard accessories:
- Linear scale on X,Y,Z axes
- Spindle oil cooler
- Automatic power off
- Hydraulic system
- Coolant system
- Lubricator system
- Alarm lamp
- Work lamp
- M.P.G.
- RS232 interface
- Heat exchanger
- Chip conveyor and cart
- Leveling bolts & pads
- Controller manuals and circuit diagram
- Operation manuals
- Machine inspection lists
- Splah guards (around the table)
- Toolbox
- FANUC 0i-MF
- ATC : 40 Tools
optional accessories:
- Choice of Various magazines (60 / 90 tools)
- Oil mist device
- Choice of various controllers {FANUC/MELDAS/SIMENS/HEIDENHAIN}
- Various auxiliary work tables are available.
- Air conditioner at the electrical cabinet
- Extension sleeve 250 / 300mm
- Coolant through spindle
- Choice of various sizes of tables a1600x1800 (For UBM-110xxRT, 110xxR, 130xxRT series) b.2000x2000 / 2000x3000 / 2200x2400(For UBM-1300xxR series) c.2500x3000 table with 40tons of loading capacity(UBM-130xxRL, 1500xxRL series)
- Manual 90 angular milling head
- Face milling head
- 30/37kW spindle motor and ZF-300 gearbox(For UBM-130, 150 series)
