Creativity / Continuity / Quality

UHM CNC Horizontal Machining Center Inquiry

> UHM Long Table

UHM long table

  • Features:

    • The long table can be fitted with multiple hydraulic rotary tables for clamping several workpieces for machining with only one setup, which increases efficiency significantly.
    • For machining a same type of workpiece, one tool can machine several workpieces then perform tool change, thus reducing tool change time.
    • Several same type of workpieces can be machined at a time with only a single setup.
  • MODEL UNIT UHM-1212T UHM-1512T UHM-1612T UHM-2012T UHM-3212T UHM-4212T
    TABLE Table Size mm 1200X800
    Long Table    		 1600X900
    Long Table    		 1600X800
    Long Table     		3000X1100
    Long Table    		 4000X1100
    T-Slots mm 22X7 22X7 22X7
    Maximum Load kg 4000 4000 5000 6000 10000
    Indexing Degree 　 　 　 　
    TRAVEL X Axis mm 1200 1500 1600 2000 3200 4200
    Y Axis mm 1270(1350) 1270(1350) 1270(1350)
    Z Axis mm 1000 1200 1200
    SPINDLE Speed rpm 4000(6000,8000)
    Taper 　 7 / 24 taper ISO.50, BT-50
    DISTANCES Spindle Center to Table mm 0~1270(1350) 0~1270(1350)
    Spindle Nose to Table Center mm 200~1200 200~1400
    Height from ground to table surface mm 1180 1180
    FEED RATE Rapid Feed rate X/Y/Z m/min 20
    Minimum Setting mm 0.001
    Cutting Feed rate mm/min 1~5000
    MOTOR Spindle Servo Motor-cont./30min. kW 11/15(15/18.5) 15/18.5(22/26)
    X/Y/Z/B Servo Motors kW 4/7/4 4/7/4
    Lubricator Motor kW 0.15
    Hydraulic Pump kW 3.7
    Coolant Pump kW 1.62
    Chip Conveyor kW 0.25
    Oil Cooler Pump kW 3.6
    ATC No. of Tools pieces 40(60)
    Tool Selection 　 Any type (Absolute)
    Max. Tool (Diameter/Length) mm Ø125/Ø250(Without Adjacent Tool)/Length 400
    Max. Tool Weight kg 18(25)
    MISCELLANEOUS Power Required kVA 40 45
    Pressurized Air kg/cm² 6
    Machine Weight ton 15 15 16 19 24 　

  • standard accessories:

    1. Linear scale on X,Y,Z axes
    2. Spindle oil cooler
    3. Automatic power off
    4. Hydraulic system
    5. Coolant system
    6. Lubricator system
    7. Alarm lamp
    8. Work lamp
    9. M.P.G.
    10. RS232 interface
    11. Heat exchanger
    12. Chip conveyor and cart
    13. Leveling bolts & pads
    14. Controller manuals and circuit diagram
    15. Operation manuals
    16. Machine inspection lists
    17. Splah guards (around the table)
    18. Toolbox
    19. FANUC 0i-MF
    20. ATC : 40 Tools

    optional accessories:

    1. ATC: 60 Tools
    2. Oil mist device
    3. Variety of controllers( FANUC / MELDAS /SIEMENS / HEIDENHAIN / FAGOR)
    4. Various auxiliary work tables are available
    5. Air conditioner at cabinet
    6. Coolant through spindle
    7. 0.001 indexing on B-axis
    8. Tool length & diameter measurement
    9. Work piece coordinate measuring
    10. Arm Type A.T.C (Tool Max.25kg)
    11. UHM-630T Working table Loafin 2500KG

YoU maCHINE, you win!

U'chine always works hard to deliver machines with ever better performance, creating a new bench mark with every new model.

©2016 Copyright UCHINE All Rights Reserved.
Design by Taiwan Products, B2BChinaSources, B2BManufactures